Computer Requirements
Pentium or Athlon class of computer

Operating System
Windows 95, 98, NT, 2000, Xp

Interface Options
GPIB (IEEE488), National Instruments card (only)
RS232 - for selected equipment

Emissions
(Radiated & Conducted)

Software Drivers
For details see the separate list...

Receivers
Rohde & Schwarz Range
Electro-Metrics, MEB, MessTec

Analysers
Hewlett Packard Range
Marconi, Anritsu, Advantest,

( over 90 receivers & analysers are currently accomodated - if you do not
see the test equipment you are interested in, please call our sales or technical
departments to discuss your requirements ).

Test Environments
Chamber
Open Area Test Site (OATS)
GTEM (and GTEM Manipulator),
TEM Cell

Detectors
Peak, Quasi Peak, Average,
RMS (depends upon Receiver/Analyser)

Additional Software features:

Calibration
Easy to use calibration routines
for Receivers and Analysers

Data Capture Modes
Scan Mode (swept data)
Measure Mode (single frequency measurement)
Automatic Mast / Turntable data capture routines
Top 'N' signals captured and analysed
Ambient signals subtracted

Masts and Turntables
Most Common models from EMCO / ETS,
Chase and Comtest etc

Utilities and Tools
Create Cable Loss factors
Factor data import (NPL, Chase formats)
Add / Remove factors from stored Data (post processing
Maximise up to 100 stored data files

Correction Factors
Easy to create and edit all factors needed
Unlimited number of correction points each file

Factors for
Pre-Amplifiers
Antennas (including user defined units)
Cable Loss (any number of cables may be added)
Broadband Factors for certain receivers
External Attenuators
Specification and Limit lines

Special Modes
These special modes of operation have been
commissioned by users in the past.
These features are now available as Standard.

Surveillance Mode

Polar Plotting

RS232 Remote Switch activating Sweep

---

Correction Factors and Limit / Specifications
All our software uses a common software module.
Data may easily be typed in directly or imported from data (discs)
supplied by Calibration Test Houses.
Unlimited number of Factors or Specs may be created
Each File may have an unlimited number of data points

Help Facilities
Context sensitive help with software
Comprehensive Manual
EMC Hire Ltd Help Line, direct to Software Team
Online Internet / Email Help
One to One Training can be supplied

Security Key / Dongle
For data capture using EMC equipment, a Security Dongle
must be fitted to the computer.
The software may be used for data processing
without a Dongle.

Networked Computer
Option to use server to hold common
Correction Factors and Data Files

Remote Data Capture
Specialised add-on module to allow
remote operation of computer for data capture