All our software is developed in house

Contact our Sales or Technical Departments for more information

We provide drivers for most of the popular equipment in use including RF Signal Generators, Power Meters, Field Probes, Voltmeters, etc (the list is constantly upgraded, see the list below). This powerful yet easy to use package runs under Windows 95 and above. The software communicates with the test equipment via any National Instruments GPIB interface card.

There are both Radiated and Conducted test packages. The test software is easily set up via a simple configuration window, which allows the system to be checked for correct operation before committing to formal testing.

Masts, Turntables and Field Probes (single and multiple options for both Commercial and MIL testing) are provided. There is also a powerful Equipment Under Test (EUT) feedback monitoring option, allowing up to 10 additional channels of user specified data to be monitored, recorded and reported. These monitoring channel drivers may be created directly by the user to suit the EUT in question. Any GPIB or RS232 device driver may be created. We can provide drivers to the customer's own requirements. In addition A-to-D converters may be installed to directly read the EUT voltage or currents.

Like the EMISSIONS software, test result data is saved with full test details in the header part of the file. This allows a full audit trail of how the final measurement was obtained. In addition an old test may easily be recovered and repeated with this information. The data is saved in a simple ASCII text format. This allows the data to be easily imported into any word processor, spreadsheet or graphics program.

Built into the software is a powerful graphics and reporting window. This allows the captured data to be easily presented in a suitable format for reporting purposes. The output may be directed to any Windows-supported printer or be saved to an image format suitable for direct linking to a word processor report.