HP8593EM EMC Spectrum Analyser

Mains only with Pk and Quasi- pk. Det. CISPR bandwiths. Although covering a wide frequency span there is a break point at 2.680 GHz so that sweeps can be set running up to, or from that freq point on. Can be operated with our Item 124 laptop + s/w. Another example of the fine range of HP EMC analysers. Of particular note is the relatively low noise floor compared with its contemporaries. An operating handbook is included with the analyser in a custom fitted case. Self-calibration is achieved with a 100MHz comb generator plus/minus .007 % for both frequency and level. Input attenuator: 0-56dB in 8dB steps. Dynamic range: 111dB. Power requirement: 240vac; 50Hz less than 500 watts. The end user may wish to consider using a microwave pre-amplifier to improve the sensitivity. See (Item 444), Section 400