R&S ESPI-3 EMC Semi-Compliant Rx

A pre-compliant receiver testing to: CISPR16-1/VDE/EN/FCC/ VCCI. Mains operation. It’s classed as pre-compliant because the correct pulse weighting to CISPR16-1 is achieved only from 10Hz PRF or higher. In many EMC measurement situations this is not an issue. This receiver can be used as stand-alone or with our Item 124 laptop + s/w. There are two modes of operation, either as an EMI receiver (with pre-selector) or as a spectrum analyser. This is a good “workhorse” from R&S with many of the already outstanding features of earlier models but in particular an extremely fast measurement down to 100uS or up to 100S in the receiver mode. The design anticipates the inexorable climb in upper frequency limits for future emission test programs. The receiver is also well equipped to carry out the conducted tests as well as the radiated. Antenna or transducer factors can be stored to provide a composite data display of emissions against spec lines on its own internal print-out facility. A high measurement accuracy typically less than 0.7dB. A choice of 5 detectors (3 simultaneously) EMI Bandwidths of: 200Hz;9kHz;120kHz & 1MHZ. Built-in 20dB gain pre-amplifier after the pre-selector. Parallel detectors for simultaneous display of Peak; Quasi and average values. Brilliant 21cm TFT colour display unit. For more comprehensive & detailed specification go to:http://www.rohde-schwarz.com