Item 952 - Radiated Emissions System
Emissions testing involves measuring the amount of RF energy being given off by a EUT. Radiated Emissions tests use a tuned antenna to measure the energy that is being radiated at a given distance. When using a calibrated antenna, the antenna gain factor is included in the measurement to allow the electric field strength to be measured in dBµV/m (decibel micro-volts per metre), or the magnetic field strength in dBµA/m (decibel micro-amps per metre).
The EMC standard will dictate the frequency range to be assessed and the relevant test parameters, such as resolution bandwidth, measurement time etc.
Equipment
Equipment shall be selected by EMC Hire engineers based on the customer needs, therefore please provide as much information as possible (e.g. applicable standard, test limit etc) when enquiring.
The system consists of antennas appropriate to the frequency range, a test receiver, pre-amp (if needed), antenna stand and cables.
An automatic mast and turntable can be provided for fully-automated systems when applying the EMC Directive.
A laptop containing DARE RadiMation test software is included in the system, which will be preloaded with the appropriate test configurations including transducer factors. A software operating procedure is also included to guide you through using the software.
Test Support
EMC Hire can provide an Engineer to set up the system at your location if required, or can offer remote assistance via Teamviewer or Teams.
Standards that can be provided include:
- CISPR 16-2-3
- Mil Std 461 – RE101 / RE102
- Def Stan 59-411 – DRE01 / DRE02
Item 952 - Radiated Emissions System
Specifications
|
Frequency Range |
H-Field up to 30 MHz E-Field 10 kHz to 18 GHz |
|
System comprises: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Laptop with Control Software, including all necessary ancillaries |
In response to your enquiry via phone or through this website, an engineer will contact you to discuss your requirements. We advise that you download the below Test Systems Enquiry Form to expedite the process and ensure that your requirements are fully understood and met.
Test Systems Enquiry Form Download
Complete the form filling in all of the information you have about your test requirements and Equipment Under Test and submit to our team of technical specialists at Support@emchire.co.uk and we will contact you to discuss your requirements and time frames.
