EMC Item no.: | 952 |
Category: |
|
Test Mode: | Emissions |
Test Type: | System |
Frequency: | 20Hz-40GHz |
During Radiated Emissions (RE) testing, Emissions radiating from the Equipment Under Test (EUT) are measured in order to confirm that the EUT is not producing levels above specified limits which could affect other equipment.
An integrated Radiated Emissions system is included along with an Antenna, Analyser / Reciever, Pre-Amplifier (if required), RF Cable, as well as a Tripod / Stand with adaptors suited to the devices provided.
EMC Hire engineers will select equipment based on the customer's needs, so please provide as much information as possible (e.g. applicable standard, limits, distance, etc.).
The measurement device can be Low Frequency E-Field Antenna, Low Frequency H-Field Antenna, HF-VHF Antenna, VHF-UHF Antenna, Microwave Antenna, depending on the standard.
A laptop containing RadiMation test software is included in the system, which will be preloaded with the appropriate test configurations including factors. A software operating procedure is also included to guide you through using the software aswell as set-up photos to help you assemble the equipment.
We invite you to visit our facility for a demonstration and training, or EMC Hire can provide an engineer to set up the system at your location if necessary, or provide remote assistance via Teamviewer or Teams.
The specification of the test equipment for this group is tailored around the customer's requirement.
Frequency ranges and test parameters vary depending on the standard applied, our engineers will advise on the best equipment to meet your requirements.
The table below shows some of the available options for the Radiated Emissions system. Include the option number in your enquiry to aid in the item selection.
Option No. |
Test Method |
Applications |
#1 |
CISPR 16-2-3 |
Enclosure Port |
#2 |
CISPR 12 |
Vehicle Automotive |
#3 |
CISPR 25 |
Sub-System Automotive |
#4 |
Def Stan 59-411: DRE01 |
Air, Land & Sea Service |
#5 |
Def Stan 59-411: DRE02 |
Air, Land & Sea Service |
#6 |
Mil Std 461: RE101 |
Air, Land & Sea Service |
#7 |
Mil Std 461: RE102 |
Air, Land & Sea Service |
In response to your enquiry via phone or through this website, an engineer will contact you to discuss your requirements. We advise that you download the below Test Systems Enquiry Form to expedite the process and ensure that your requirements are fully understood and met.