EMC Item no.: 961
  • Test Systems     &     Laboratory Hire
  • Full Test Systems Descriptions
  • ISO 7637
  • Regulation 10
  • DEF STAN 61-5
  • EN-61000-4-4 : Fast Transients
  • EN-61000-4-5 : Surge Immunity
  • EN-61000-4-11 : Dips, Interruptions and Variations
Test Mode: Transient
Test Type: System

There is a minimum 3-day hire period

Product description

During Transient Immunity testing, various transient pulses are applied to the Equipment Under Test's (EUT) power supply input or the EUTs cabling in order to confrim that the transients do not degrade performance or cause deviations from the specifications of the EUT.

These transients are used to simulate short durating, high amplitude disturbances that can disrust or destroy electronic circuitry.

A transient generator is included along with a coupling de-coupling network (CDN) (if applicable).

EMC Hire engineers will select equipment based on the customer's needs, so please provide as much information as possible (e.g. applicable standard, test level, etc.).

A CDN will be used as the injection device, this will either be built into the transient generator or an external CDN will be required depending on the standard and test levels.

We invite you to visit our facility for a demonstration and training, or EMC Hire can provide an engineer to set up the system at your location if necessary, or provide remote assistance via Teamviewer or Teams.

General specification

The specification of the test equipment for this group is tailored around the customer's requirement.

Frequency ranges and test levels vary depending on the standard applied, our engineers will advise on the best equipment to meet your requirements.

The table below shows some of the available options for the Transient Immunity system.  Include the option number in your enquiry to aid in the item selection.

Option No.

Test Method



EN 61000-4-4

Signal Ports


DC Power Ports


AC Power Ports


EN 61000-4-5

Signal Ports


DC Power Ports


AC Power Ports


EN 61000-4-11

AC Power Ports


ISO 7637-2



ISO 16750-2




Land & Sea Service

In response to your enquiry via phone or through this website, an engineer will contact you to discuss your requirements. We advise that you download the below Test Systems Enquiry Form to expedite the process and ensure that your requirements are fully understood and met.

Test Systems Enquiry Form Download Send to Support@emchire.co.uk