| EMC Item no.: | 454 |
| Category: |
|
| Test Mode: | Immunity |
| Manufacturer: | Amplifier Research |
| Frequency: | 0.8GHz-4.2GHz |
Product description
The Model 25S1G4A is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The 25S1G4A, when used with a sweep generator, will provide a minimum of 25 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The RF amplifier stages are protected from over-temperature. There is a digital display on the front panel to indicate the operate status and fault conditions if an over-temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared.
Modulation Capabilities: The amplifier will faithfully reproduce AM, FM or PULSE MOD appearing at the i/p.
General specification
Provides a front panel gain control with approx 10dB variation.
RATED POWER OUTPUT ................................................25 watts minimum
INPUT FOR RATED OUTPUT ..........................................1.0 milliwatt maximum
FLATNESS .....................................................................±1.5 dB typical ±2.0 dB maximum
FREQUENCY RESPONSE ...............................................0.8 – 4.2 GHz instantaneously
GAIN (at maximum setting) ...........................................44 dB minimum
GAIN ADJUSTMENT ......................................................(Continuous Range) 10 dB minimum (4096 steps remote)
INPUT IMPEDANCE .......................................................50 ohms
VSWR 2.0:1 maximum
OUTPUT IMPEDANCE ...................................................50 ohms, nominal
MODULATION CAPABILITY ...........................................Will faithfully reproduce AM, FM, or pulse Modulation appearing on the input signal
HARMONIC DISTORTION .............................................Minus 20 dbc, max at 20 watts
SPURIOUS ....................................................................Minus 73 dbc Typ.
PHASE LINEARITY ..........................................................± 1.0 deg/100 MHz, Typ
PRIMARY POWER ..........................................................(Selected Automatically)
90-132, 180-264 VAC 50/60 Hz, single phase 340 watts maximum
CONNECTORS
RF ..........................................................................Type N female
REMOTE INTERFACES
IEEE-488 .............................................................24 pin female
RS-232 ...............................................................9 pin Subminiature D (female)
SAFETY INTERLOCK ......................................................15 pin Subminiature D
