EMC Item no.: 592
  • Transient Generators / Harmonic & Flicker Analysers
Test Mode: Immunity
Test Type: Conducted
Manufacturer: EM Test
Frequency: 150kHz-240MHz

There is a minimum 3-day hire period

Product description

The CWS 500 is a single unit designed for 150 Ohm system testing to EN61000-4-6 and includes a kit containing necessary leads and 6dB attenuator.

The CWS 500 unit essentially has a built in signal generator, a power amplifier, and a directional coupler with volt meter.

The unit has its own calibration and test routine run from the front panel.

You will require an additional ground plane (Item 817) along with either a BCI Probe (Item 258 & 251) or EM Clamp (Item 254) as shown in the pictures above.

NOTE: BCI Clamp Injection will require additional 50-150Ω adaptors (Item 256).




General specification

Frequency Range: 150kHz to 240MHz
Amplifier output: 75W


For up to 10V emf level tests.

Includes GPIB IEEE-488 & RS232 interfaces and a parallel port.