EMC Item no.: 231
  • Current Probes / Clamps / LISNs / CDNs
  • Current Probes & Clamps
Test Mode: Immunity
Test Type: Calibration
Manufacturer: EMC Hire
Frequency: 20Hz-500MHz

There is a minimum 3-day hire period

Product description

The probe line transmission jig enables current probes to be inserted in a 50Ω coaxial system, which is extensively  used for current monitoring during conducted immunity, but could be used for current probe calibration. Four screws hold the top plate in place enabling the probe to be inserted. 


General specification

Frequency range:                          20Hz to 500MHz

Characteristic Impedance:             50 Ohm nominal with

                                                     probe inserted.

Centre pin current:                        20A

Accommodating Probe Aperture:    18mm

Probe Outer  Diameter:                 118mm

Probe width max:                         40mm

Connection :                                N-type (f) both sides