This is a mains driven bench-top design which will control both EMCO 2075 mast and 2065 turntable together. It has a clear, easy to read display. The left side is devoted to operating the mast, reading out height in cm. Both upper and lower electrical limits can be set allowing the up and down buttons movement between the limits. It can also be made to cycle continuously between customised set limits. The polarisation of the antenna can also be operated from the front panel. Where the polarisation change causes a difference in height, it can be programmed in so that the CP (Current Position) will always read correctly. The right side is devoted to controlling the 2065 Lo-Pro turntable, reading out the azimuth position in degrees. Again, both CW and CCW limits can be set and the table made to cycle between set limits. The GPIB address is also set from the front panel. It is delivered with 20 metres of fibre optic to connect to either mast or turntable or both.