| EMC Item no.: | 305 |
| Category: |
|
| Test Mode: | Emissions |
| Test Type: | Radiated |
| Manufacturer: | EMCO |
| Frequency: | 1kHz-30MHz |
Product description
Designed for use with most 50 Ohm input receivers and it includes an 10dB RF pre-amplifier. The antenna is powered by a rechargeable battery and comes with a battery charger. It can easily be mounted on a standard tripod (¼ UNC(f) receptor) or the NCTM-100 (Item 813). The antenna also supports an “overload” LED when an i/p signal exceeds 10v/m. This can be remotely observed with a remote adaptor.
General specification
Calibrated Frequency Range: 10kHz-30MHz
Impedance: For use into 50Ω system
Signal Output Connector: BNC
Outside Diameter: 33cm (13")
Height: 37cm (14.5”)
Power: 2 x 6 volt rechargeable sealed
lead-acid battery cells
Re-charge time: 8 hours with approx 8hr run
time.
Overload limit: 10V/m
Sensitivity Typical: 11dBuA/m @10kHz,
-29dBuA/m @ 1MHz with
a 200Hz bandwidth &
average detector
