| EMC Item no.: | 179 |
| Category: |
|
| Test Mode: | Field |
| Test Type: | Magnetic |
| Manufacturer: | Narda |
| Frequency: | 1Hz-400KHz |
Product description
The ELT-400 measuring instrument for assessing levels of magnetic fields for acceptance testing in compliance with the EMF Directive 2013/35/EU for exposure in workplaces. It is also an aid to writing risk assessments for workplace areas.
Displays directly as a percentage of the limit value taking frequency components into account automatically.
- Limit value traces conforming to EMF Directive 2013/35/EU
- Real time measurement with RMS and peak detectors
- External FFT signal analysis for determining the frequency components via three channel analog output (one channel for each spatial axis) e.g. with the aid of a digital oscilloscope
- Wide measurement range up to 80mT
- IEC/EN 62311 and 62233 standard compliant including isotropic 100 cm² probe
- Three axis analog signal output
The ELT-400/107 uses a standard-compliant 100 cm² probe for this. We do not currently have the 3 cm² probe.
General specification
The ELT-400 has a 3 orthogonal magnetic Sensor displays with
an alphanumeric display.
Overload limit 80mT.
Reading “peak” or RMS” value.
A max-hold facility enables capture of worst case.
Values are displayed in uT and mT and as a %.
Output also through RS232 adaptor on side of instrument.
Wide frequency range (1 Hz - 400 kHz).
Standard-compliant measurement.
Real time measurement with RMS and peak detectors.
External FFT signal analysis for determining the frequency.
components via three channel analog output
(one channel for each spatial axis).
e.g. with the aid of a digital oscilloscope.
- EXPOSURE STD: 2013/35/EU Low ALs
- EXPOSURE STD: 2013/35/EU High ALs
- EXPOSURE STD: 2013/35/EU Limbs ALs
- FIELDSTRENGTH: 80 mT
Other accessories are available - please contact us
