EMC Item no.: 688
  • Couplers / Loads / Filters / Attenuators / Peripherals
  • Auxillary Test and Monitoring Equipment
Test Mode: General
Test Type: Chamber
Frequency: 10MHz Clocks

Product description

Kit assembled by EMCH to enable the 10MHz clocks of receivers and Signal Generators to be interlinked from inside and outside shielded chambers via a non-conductive fibre optic.( Coaxial link-ups would compromise the whole shielding integrity). A short BNC coaxial cable connects from the “ OSC OUT” at rear of the receiver (master) to the fibre coverter which is mains powered via a small plug-in unit. The fibre can be then fed and plugs into the second converter turning the clock signal back into an electrical coaxial connection via a short cable to the signal generator (slave). Useful between inside & outside of chambers.