EMC Item no.: 218
Category:
  • Current Probes / Clamps / LISNs / CDNs
  • Current Probes & Clamps
Test Mode: Emissions
Test Type: Conducted
Manufacturer: Luthi
Frequency: 30MHz-1GHz

Product description

The absorbing clamp method of measurement is accepted by European EMC regulations as a standard method of measuring the interference power levels on cables connected to electronic & electrical devices. The clamp consists of a ferrite current transformer calibrated over the freq range with two groups of ferrite rings. The rings act as absorbers of energy & impedance stabilisers. The concept behind this is to isolate the EUT from external interference coming up from the mains.

 

General specification

 

Frequency range: 30MHz to 1GHz

Insertion Loss:   See graph as per handbook

Output Impedance: 50 ohms nominal

Cable aperture:       18mm max.

Output connector:   BNC