| EMC Item no.: | 105 |
| Category: |
|
| Test Mode: | Emissions |
| Manufacturer: | Rohde & Schwarz |
Product description
This device is a true “Spectrum Analyser” with a tracking generator up to 6GHz. Another unique property allows the operator to select the number of data points to be measured in any one sweep. This can be as high as 5000 which would provide a very high degree of resolution when needed. All the usual functions associated with an Analyser of this quality can be readily called up via front panel softkeys.
NOTE: This is a PEAK only detector type of device.
Installed options:
B4 - OCXO
B5 - AUX IFC's
B7 - NB resolution filters
B10 - GPIB
B22 - RF Pre-amp
B30 - DC Input
D5 - Power sensor
General specification
Frequency range R&S FSL6 9 kHz to 6 GHz
Frequency resolution 1 Hz
Sweep time
Sweep time span = 0 Hz 1 μs to 5 μs in 125 ns steps
5 μs to 16000 s in 5 % steps
10 Hz ≤ span ≤ 3.2 kHz 2.5 ms to 5 s/Hz × span
3.2 kHz < span ≤ 1.5 GHz 2.5 ms to 16000 s
1.5 GHz < span ≤ 3 GHz 5 ms to 16000 s
span > 3 GHz 10 ms to 16000 s
Uncertainty span = 0 Hz nominal 0.1 %
span ≥ 10 Hz nominal 3 %
Resolution bandwidths
Sweep filters
Resolution bandwidths 300 Hz to 10 MHz (–3 dB) in
1/3 sequence
EMI filters
6 dB bandwidths 9 kHz, 120 kHz, 1 MHz
FFT filters
3 dB bandwidths 300 Hz to 30 kHz in 1/3 sequence
Display range displayed noise floor to +20 dBm
Spectral purity SSB phase noise f = 500 MHz
Carrier offset 1 kHz typ. –95 dBc (1 Hz)
10 kHz < –98 dBc (1 Hz), typ. –103 dBc (1 Hz)
100 kHz < –98 dBc (1 Hz), typ. –105 dBc (1 Hz)
1 MHz < –115 dBc (1 Hz), typ. –120 dBc (1 Hz)
Maximum rated input level R&S FSL6
DC voltage 50 V
CW RF power 30 dBm (= 1 W)
Peak RF power 36 dBm (= 4 W) < 3 s
Max. pulse voltage 150 V
Max. pulse energy pulse width 10 μs 10 mWs
