R&S FSL-6 Spectrum Analyser

EMC Item no.: 122
Category:
  • Analysers / Receivers / Power Meters
  • Tuneable Receivers and Analysers
Test Mode: Emissions
Manufacturer: Rohde & Schwarz
Frequency: 9kHz-6GHz

Product description

This device is a true “Spectrum Analyser” with a tracking generator up to 6GHz. Another unique property allows the operator to select the number of data points to be measured in any one sweep. This can be as high as 5000 which would provide a very high degree of resolution when needed.  All the usual functions associated with an Analyser of this quality can be readily called up via front panel softkeys. Our software in item 124 will address it in the emission package.

NOTE: This is a PEAK only detector type of device.

 Installed options: 

B4 - OCXO

B5 - AUX IFC's

B7 - NB resolution filters

B10 - GPIB

B22 - RF Pre-amp

B30 - DC Input

D5 - Power sensor

 

General specification

 Frequency range R&S FSL6 9 kHz to 6 GHz

 Frequency resolution 1 Hz

 Sweep time

 Sweep time span = 0 Hz 1 μs to 5 μs in 125 ns steps

 5 μs to 16000 s in 5 % steps

 10 Hz ≤ span ≤ 3.2 kHz 2.5 ms to 5 s/Hz × span

 3.2 kHz < span ≤ 1.5 GHz 2.5 ms to 16000 s

 1.5 GHz < span ≤ 3 GHz 5 ms to 16000 s

 span > 3 GHz 10 ms to 16000 s

 Uncertainty span = 0 Hz nominal 0.1 %

 span ≥ 10 Hz nominal 3 %

 Resolution bandwidths

 Sweep filters

 Resolution bandwidths 300 Hz to 10 MHz (–3 dB) in

 1/3 sequence

 EMI filters

 6 dB bandwidths 9 kHz, 120 kHz, 1 MHz

 FFT filters

 3 dB bandwidths 300 Hz to 30 kHz in 1/3 sequence

 Display range displayed noise floor to +20 dBm

 Spectral purity SSB phase noise f = 500 MHz

 Carrier offset 1 kHz typ. –95 dBc (1 Hz)

 10 kHz < –98 dBc (1 Hz), typ. –103 dBc (1 Hz)

 100 kHz < –98 dBc (1 Hz), typ. –105 dBc (1 Hz)

 1 MHz < –115 dBc (1 Hz), typ. –120 dBc (1 Hz)

 Maximum rated input level R&S FSL6

 DC voltage 50 V

 CW RF power 30 dBm (= 1 W)

 Peak RF power 36 dBm (= 4 W) < 3 s

 Max. pulse voltage 150 V

 Max. pulse energy pulse width 10 μs 10 mWs