| EMC Item no.: | 582 |
| Category: |
|
| Test Mode: | Transient |
| Test Type: | ESD |
| Manufacturer: | Teseq |
Product description
The NSG 435 has a LCD panel that continuously displays the operating status and all user-selected test parameters. Its user friendly interface allows the user to programme the required parameters quickly and accurately.
The NSG 435 has an internal battery. In addition to the pre-programmed, standard pulses, it will allow the user to create custom tests using single or repetitive discharges with selectable rates and manual or automatic polarity switching.
The unit comes with a standard 150 pF/330 Ω discharge network for tests to IEC/EN 61000-4-2.
General specification
|
Basic set |
Carrying case with: electrostatic discharge simulator,rechargeable battery pack, battery charger 100 to 240 VAC, discharge network 150 pF/330 Ω, air- and contact-discharge tips, grounding cable, tripod adapter, user manual |
|
Pulse |
Network 150 pF/330 Ω as per IEC/EN 61000-4-2 |
|
Discharge voltage |
Air-discharge: 200 V to 16.5 kV (in 100 V steps) |
|
Discharge |
Ball and point as per IEC |
|
Charging voltage measurement |
kV, accuracy better than ±5% (stabilized) |
|
|
|
|
Holding time |
>5 s (charging voltage ... ±5%) |
|
Polarity |
Positive / negative / automatic change |
|
Operating modes |
Single / repetitive = |
|
Display |
LCD panel showing: charging voltage, discharge voltage, polarity, air/contact-discharge, counter/preselect counter content, soft-key functions, battery monitor |
|
|
|
|
|
Other accessories are available - please contact us
