EMC Hire supplies a range of current probes to help Engineers measure a wide range of current flows in power supplies and electrical circuits, covering AC/DC or just AC or DC current. 

EMC Hire supplies primarily clamp-on current probes, otherwise known as magnetic core current probes. This is an indirect technique in which the probe is clamped around the current-carrying wire or conductor and makes non-contact current measurements.

The probe gives a measurable voltage signal proportional to the amplitude of the measured current. The advantage of this technique is that it is non-invasive and isolated, so the probe is not electronically connected to the device under test.

The advantages of using clamp-on current probes include:

  • Galvanic isolation between the probe and the device under test
  • They can be placed anywhere on the current path without breaking the circuit
  • Low insertion impedance

Selecting the correct current probe

To ensure you select the correct current probe for your application, assess the following questions:

  • Are you measuring AC, DC or AC riding on top of DC?
  • What are the minimum and maximum current ranges you are aiming to measure?
  • What is the common mode voltage of the current signal you’re measuring?
  • How fast is your target current signal?
  • What is the size of the device / Cable diameter under test?
  • How many current probes or voltage probes will be used at the same time?
  • What is the maximum voltage and current output of the conductor to be measured?

Need some advice? 

Our team of experts are here to help!

Contact Us

Found: 32 result(s) matching your search criteria (0.0594 seconds)
Fischer F-52 Signal Current Probe

Fischer F-52 Signal Current Probe

Item no. 223

10kHz-500MHz

Fischer F-55 Signal Current Probe

Fischer F-55 Signal Current Probe

Item no. 224

10kHz-500MHz

Fischer F-35 Signal Current Probe

Fischer F-35 Signal Current Probe

Item no. 203

200Hz-100MHz

Fischer F-50 Signal Current Probe

Fischer F-50 Signal Current Probe

Item no. 206

1MHz-400MHz

Luthi MDS-21 Absorbing Clamp

Luthi MDS-21 Absorbing Clamp

Item no. 218

30MHz-1GHz

Fischer F-55A Signal Current Probe

Fischer F-55A Signal Current Probe

Item no. 225

1kHz-500MHz

EMCO 3701 Line Probe. 450kHz - 30MHz

EMCO 3701 Line Probe. 450kHz - 30MHz

Item no. 220

450KHz-30MHz

Fischer F-92 Skin Current Probe.

Fischer F-92 Skin Current Probe.

Item no. 216

1MHz-400MHz

Fischer F-35-1/2 Signal Current Probe

Fischer F-35-1/2 Signal Current Probe

Item no. 205

100Hz-100MHz