FischerCC BCI & Current Probes

posted on: Wednesday, 16 Nov 2016

EMC Hire are pleased to announce additional investment in the following FischerCC Bulk Current Injection and Current probes:

  • FCC-BCICF-1 Bulk Current Injection Probe Fixture. The FCC-BCICF-1 calibration fixture allows the user the quickly and easily calibrate the injection probe prior to performing compliance testing.
  • F-120-6A Bulk Current Injection Probe. The F-120-6A is a broadband, high efficiency injection probe. Large RF currents can be coupled on to a signal or power circuit under test between 10 kHz – 400 MHz. The probe has an insertion loss of <9 dB or less over the 1.8 MHz – 400 MHz region.
  • F-55A Current Monitor Probe. The F-55A is for laboratory and field testing. It is capable of measuring pulse transients with risetimes of 800 picoseconds and a pulse width of 3 microseconds. This probe has a small outer diameter, approximately 71 mm, with an internal diameter of 32 mm. Its transfer impedance is 0.1 Ω from 100 kHz to 500 MHz. It can operate up to 350 amperes of DC – 400 Hz, 10 amperes of CW and 100 amperes of peak pulse.

 

 

FischerCC BCI & Current Probes
enlarge image EMCHire Emlarge Image
FischerCC BCI & Current Probes
enlarge image EMCHire Emlarge Image