EMC Item no.: 959
Category:
  • Test Systems     &     Laboratory Hire
  • Full Test Systems Descriptions
  • ISO 10605 ESD
  • Regulation 10
  • DEF STAN 59-411
  • MIL STD 461
  • EN-61000-4-2 : ESD
  • Commercial CE Mark
Test Type: System

There is a minimum 3-day hire period

Product description

During Electrostatic Discharge (ESD) testing, the Equipment Under Test (EUT) will be subject to ESD at applicable test levels to confirm that the EUTs performance does not degrade and there are no deviations from the specifications of the EUT.

An ESD simulator is included along with a ground plane (if required).

The ESD simulator will include a contact discharge (CD) tip, air discharge (AD) tip and high voltage (HV) tip (only included with certain simulators)

EMC Hire engineers will select equipment based on the customer's needs, so please provide as much information as possible (e.g. applicable standard, test level, etc.).

We invite you to visit our facility for a demonstration and training, or EMC Hire can provide an engineer to set up the system at your location if necessary, or provide remote assistance via Teamviewer or Teams.

General specification

The specification of the test equipment for this group is tailored around the customer's requirement.

Frequency ranges and test levels vary depending on the standard applied, our engineers will advise on the best equipment to meet your requirements.

The table below shows some of the available options for the ESD system.  Include the option number in your enquiry to aid in the item selection.

Option No.

Test Method

Applications

#1

EN 61000-4-2

Enclosure Ports

#2

DCS10

Air, Land & Sea Service

In response to your enquiry via phone or through this website, an engineer will contact you to discuss your requirements. We advise that you download the below Test Systems Enquiry Form to expedite the process and ensure that your requirements are fully understood and met.

Test Systems Enquiry Form Download Send to Support@emchire.co.uk