During Radiated Immunity (RI) testing, RF energy will be transmitted at the Equipment Under Test (EUT) in order to confirm that the levels do not degrade its performance or cause deviations from the specifications of the EUT. Electric Field Radiated Immunity testing must be performed in a shielded enclosure, therefore the testing should be performed in an EMC chamber or alternatively inside a GTEM (for pre-compliance testing.). A Radiated Immunity system is included along with a signal generator, amplifier(s), coupler(s), power meter & probe, measurement field probe, GTEM (If applicable), as well as interconnecting cables with terminations suited to the devices provided. EMC Hire engineers will select equipment based on the customer's needs, so please provide as much information as possible (e.g. applicable standard, test level, etc.). The measurement field probe will be placed inside the EMC chamber or GTEM for initial calibration of the system. The required power is stored within the RadiMation software which will then be played back to test your EUT for susceptibility. A laptop containing RadiMation test software is included in the system, which will be preloaded with the appropriate test configurations including factors. A software operating procedure is also included to guide you through using the software as well as setup photos to help you assemble the equipment. We invite you to visit our facility for a demonstration and training, or EMC Hire can provide an engineer to set up the system at your location if necessary, or provide remote assistance via Teamviewer or Teams.

Radiated Immunity (GTEM) System Package

Added to your quote.

Item Number: 957
Category: ISO 11452-x
Test Mode: Immunity
Test Type: System
Manufacturer: EMC Hire
Frequency: 20Hz-18GHz

General Specification

The specification of the test equipment for this group is tailored around the customer's requirement.

Frequency ranges and test levels vary depending on the standard applied, our engineers will advise on the best equipment to meet your requirements.

The table below shows some of the available options for the Radiated Immunity system. Include the option number in your enquiry to aid in the item selection.

Option No.	Test Method	Applications
#1	EN 61000-4-3	Full System (Enclosure Ports)
#2	ISO 11452-2	Vehicle Sub-System
#3	Def Stan 59-411: DRS02	Full System
#4	Mil Std 461: RS103	Full System

Option No.	Test Method	Applications
#1	EN 61000-4-3	Full System (Enclosure Ports)
#2	ISO 11452-2	Vehicle Sub-System
#3	Def Stan 59-411: DRS02	Full System
#4	Mil Std 461: RS103	Full System

EMC Hire newsletter

A practical weekly update for engineers, technicians and anyone working with EMC testing. Receive useful guidance, technical articles and real-world lessons directly from EMC Hire.

Technical guidance

Practical EMC testing advice and useful engineering explanations.

EMC Banana Skins

Real-world mistakes, unexpected problems and lessons worth sharing.

One email a week

A concise weekly roundup with no unnecessary noise.

Join The Weekly Signal

Enter your email address and confirm your subscription from your inbox.

We use double opt-in to confirm your subscription. You can unsubscribe at any time. See our privacy policy .