EMCO Model 6512 passive loop is designed for Emissions and Immunity Testing and can be used as a transmitting (max i/p 20W) or receiving antenna. A better performance due to the coil size without the overload menace when receiving. Screened against the “E” field.

EMCO 6512 Passive Magnetic Field Loop

Added to your quote.

Item Number: 311
Category: Low Frequency Magnetic Field
Test Mode: Emissions
Test Type: Radiated
Manufacturer: EMCO
Frequency: 10kHz-30MHz

Product Downloads

Manuals, datasheets and handbooks for EMCO 6512 Passive Magnetic Field Loop are available to registered users.

General Specification

Electrical

Coil: 10 turns of No 16 SWG wound on a non- conducting Delrin form.

Useful Frequency Range: 20Hz - 50kHz

Resonant Frequency:>100kHz

Maximum Current: 10 amps short time,5 amps continuously

Coil Constant: 5 x 10^-5 Tesla/amp at
5cm from wire turns
1 Tesla = 1 Weber/sq. meter = 10⁴ gauss

Mechanical

2 female banana jacks spaced: 0.75” apart

Nominal Coil Diameter: 12cm (4.75”)

Thickness of Coil: 0.3cm

Weight: 0.45kg

EMC Hire newsletter

A practical weekly update for engineers, technicians and anyone working with EMC testing. Receive useful guidance, technical articles and real-world lessons directly from EMC Hire.

Technical guidance

Practical EMC testing advice and useful engineering explanations.

EMC Banana Skins

Real-world mistakes, unexpected problems and lessons worth sharing.

One email a week

A concise weekly roundup with no unnecessary noise.

Join The Weekly Signal

Enter your email address and confirm your subscription from your inbox.

We use double opt-in to confirm your subscription. You can unsubscribe at any time. See our privacy policy .