This magnetic field generating coil is used in radiated susceptibility tests for qualifying equipment to specification MIL-STD-461D & 462D. method RS01. When RS01 is being performed, a 1Ω, 500W resistor should be connected in series to monitor current by a suitable meter. (item 267A). However, some aspects of Mil.Std. 462D require a monitoring loop to actually confirm the strength of the magnetic field at a specific point. This monitoring loop can be found under (item 317). NOTE: to produce fields of up to 1 milliTesla we have designed a version under 319.

EMCO 7603 10T Magnetic Field Generating Coil

Added to your quote.

Item Number: 310
Category: EN-61000-4-8 : Magnetic Immunity
Test Mode: Immunity
Test Type: Radiated
Manufacturer: EMCO
Frequency: 20Hz-500kHz

General Specification

Frequencyrange: 20Hz - 50kHz

Coil: 10 turns of No 16 SWG wound on a non-conducting Delrin form.

Resonant frequency: >100kHz

Maximum Current:10 amps short time,5 amps continuously

Coil Constant: 5 x 10^-5 Tesla/amp

Connection: 2off female banana jacks spaced:19mm apart

Nominal Coil Diameter: 12cm (4.75”)

Thickness of Coil:0.3cm

EMC Hire newsletter

A practical weekly update for engineers, technicians and anyone working with EMC testing. Receive useful guidance, technical articles and real-world lessons directly from EMC Hire.

Technical guidance

Practical EMC testing advice and useful engineering explanations.

EMC Banana Skins

Real-world mistakes, unexpected problems and lessons worth sharing.

One email a week

A concise weekly roundup with no unnecessary noise.

Join The Weekly Signal

Enter your email address and confirm your subscription from your inbox.

We use double opt-in to confirm your subscription. You can unsubscribe at any time. See our privacy policy .