The Fischer F-140-A is a Bulk Current Probe used to couple known signal levels on to the cabling its clamped around. The Fischer F-140-A is typically used in conjunction with a Conducted Immunity test system.
Where would this be used? The Fischer F-140-A Bulk Current Probe can be used for Conducted Immunity testing. It can also be useful for fault finding and investigatory purposes.
The Fischer F-140-A includes a matching network, which is used for frequencies between 100kHz and 1MHz. It provides better matching, thereby reducing the reverse power going back into the amplifier. For level setting during the calibration run, this probe is fitted into a calibration fixture. During the test run, the induced current can be measured using a monitor probe.