During Magnetic Field Immunity testing, the Equipment Under Test (EUT) will be subject to a Magnetic Field in order to confirm that the levels do not degrade its performance or cause deviations from the specifications of the EUT. A Magnetic Field Immunity system is included along with a function generator, amplifier(s), power meter & probe, radiating loop, monitor loop, voltmeter, as well as interconnecting cables with terminations suited to the devices provided. EMC Hire engineers will select equipment based on the customer's needs, so please provide as much information as possible (e.g. applicable standard, test level, etc.). The monitor loop will be subject to a magnetic field generated by the radiating loop for initial calibration of the system. The required power is stored within the RadiMation software which will then be played back to test your EUT for suseptibility A laptop containing RadiMation test software is included in the system, which will be preloaded with the appropriate test configurations including factors. A software operating procedure is also included to guide you through using the software as well as setup photos to help you assemble the equipment. We invite you to visit our facility for a demonstration and training, or EMC Hire can provide an engineer to set up the system at your location if necessary, or provide remote assistance via Teamviewer or Teams.

Magnetic Field Immunity System Package

Added to your quote.

Item Number: 958
Category: DEF STAN 59-411
Test Mode: Immunity
Test Type: System
Manufacturer: EMC Hire
Frequency: 20Hz-18GHz

General Specification

The specification of the test equipment for this group is tailored around the customer's requirement.

Frequency ranges and test levels vary depending on the standard applied, our engineers will advise on the best equipment to meet your requirements.

The table below shows some of the available options for theMagnetic Field Immunitysystem. Include the option number in your enquiry to aid in the item selection.

Option No.

Test Method

Applications

EN 61000-4-8

Enclosure Ports

DRS01

Air, Land & Sea Service

DRS03

Land Service

In response to your enquiry via phone or through this website, an engineer will contact you to discuss your requirements. We advise that you download the below Test Systems Enquiry Form to expedite the process and ensure that your requirements are fully understood and met.

Option No.	Test Method	Applications
#1	EN 61000-4-8	Enclosure Ports
#2	DRS01	Air, Land & Sea Service
#3	DRS03	Land Service
#4	RS101

EMC Hire newsletter

A practical weekly update for engineers, technicians and anyone working with EMC testing. Receive useful guidance, technical articles and real-world lessons directly from EMC Hire.

Technical guidance

Practical EMC testing advice and useful engineering explanations.

EMC Banana Skins

Real-world mistakes, unexpected problems and lessons worth sharing.

One email a week

A concise weekly roundup with no unnecessary noise.

Join The Weekly Signal

Enter your email address and confirm your subscription from your inbox.

We use double opt-in to confirm your subscription. You can unsubscribe at any time. See our privacy policy .